Description
Compatibility
- All smartphone digitizer / lcd outer glass lens. This includes: IPhone 4, 4S, 5, Samsung Galaxy S, S2, S3, Note I, Note II, LG Nexus 4, etc.
- Super Low Viscosity - 1400 (MPA.S) Super low viscosity means that CyberDoc Glue is not very thick and flows very easily. Not only are air bubbles less likely to occur with CyberDoc , but they are also easier to remove. CyberDoc 's super low viscosity also means that you can get the job done with less glue than with generic LOCA formulas. Using a thinner layer of glue also results in increased optical performance of the repaired device. Ask about other generic LOCA's viscosity values, they will be most likely over 2,000 to 5,000.
- High Light Transmittance > 99% @175 um CyberDoc Glue improves the viewing experience by increasing contrast ratio and minimizing quality loss due to reflection. Its unique formula also results in lower haze and resists yellowing more than generic LOCA formulas.
- Hardness - 25A CyberDoc Glue's 25A hardness increases the display's overall strength and extends the screen assembly's life by making the display more resistant to heat, moisture, and temperature changes.
- Excellent Gap Filling CyberDoc Glue fills small scratches on the digitizer surface that may occur when removing old adhesive.
- Solvent-free CyberDoc Glue is a solvent-free and eco-friendly formula.
- Apply 0.5-2 ml to the center of the digitizer in a line. CyberDoc Glue requires only 50% to 80% of the glue needed when using generic LOCA formulas. Slowly place the glass lens onto the digitizer. Cure the glue with UV light for 3-5 minutes.
- Recommended Glue Amount:
- iphone 4: 0.5ml
- iphone 5: 0.7ml
- Galaxy S: 0.8ml
- Galaxy S2: 1ml
- Galaxy S3: 1.3ml
- Galaxy S4: 1.4ml
- Galaxy Note 1, 2: 1.7ml
- LG Nexus 4: 1.3ml
